Incogniton Integration Guide for IPBurger Proxies
This guide will show you how to configure your IPBurger proxy inside Incogniton for secure and isolated browsing.
Before You Start
Make sure you have:
✔️ Installed and logged in to Incogniton
✔️ An active IPBurger proxy
✔️ Your proxy details:
- Host / IP Address
- Port
- Username
- Password
You can find these inside your IPBurger dashboard. Below is a sample view of the IPBurger dashboard:
⚠️ The dashboard interface may vary slightly depending on your purchased proxy type.
Convert Hostname to IP Address (If Needed)
Some applications require an IP address instead of a hostname. If your setup does not accept a hostname, you’ll need to convert it to an IP address first.
Below are examples based on your proxy type:
Fresh / Dedicated Proxies
These proxy types typically use a hostname like this:
89-34-XX-XX.ip.fresh.ipb.cloud 149-28-XXX-XXX.ip.private.ipb.cloud
Simply remove the domain portion and you will be left with:
89-34-XX-XX 149-28-XXX-XXX
These represent the IP address format (with dashes instead of dots). You can convert it to standard IP format by replacing dashes with dots.
89.34.X.X 149.28.X.X
Residential / Mobile Proxies
Residential proxies typically use a rotating gateway hostname like:
residential.ipb.cloud res.ipb.cloud resi3.ipb.cloud mobile.ipb.cloud
Convert Hostname to IP
- Open Command Prompt (Windows) or Terminal (Mac/Linux)
- Windows: Press Win + R → type cmd → Enter
- Run the command: ping residential.ipb.cloud
- Look for the IP address in the result. You will see something like: Pinging residential.ipb.cloud [111.222.333.444]
👉 The number inside the brackets [ ] is the resolved IP address.
💬 If you need help getting the IP address, feel free to reach out to our 24x7 chat support.
Step-by-Step Setup
1️⃣ Open Incogniton
Launch the app and log in to your dashboard.
2️⃣ Create a New Browser Profile
- Click “New Profile”
- Enter a Profile Name
3️⃣ Configure the Proxy
Inside the profile settings:
- Click on Add Proxy
- Choose the correct proxy type (HTTP or SOCKSv5 - based on your IPBurger plan).
Now enter your IPBurger proxy details:
- Host
- Port
- Username
- Password
⚠️ Host Format Reminder: Refer to the section above “Convert Hostname to IP Address (If Needed)” for guidance.
Click Check Proxy to verify it connects successfully.
If successful, click Create Profile.
Test Proxy
After creating the profile:
- Click Start on the profile.
- Once the browser opens, visit: ipburger.com
You should see your new IP address and fingerprint details reflecting your IPBurger proxy.
✅ You’re All Set
Your IPBurger proxy is now successfully connected to Incogniton.
Note:
You may apply the coupon code UPITNOW during checkout to receive 17% off your Incogniton subscription.